BeagleBoard
The Board has been developed by a small team of engineers as an educational Board, which can be used in colleges all over the world to teach hardware and software open-source options. Also be sold to the public under the Creative Commons license. The Board is designed using Cadence OrCAD and Cadence Allegro schemes for the production of printed circuit boards; No software was used for the simulation.
BeagleBoard measured approximately 75 of 75 mm and has all the functionality of the basic computer. [9] the OMAP3530 processor includes ARM Cortex-A8 (which can run on Linux, Minix, [10] [11] FreeBSD, OpenBSD, RISC OS [12], [13] or Symbian, there are many unofficial Android port [15]), TMS320C64x DSP for accelerated video and audio decoding and image processor Imagination Technologies PowerVR SGX530, which provides accelerated 2D and 3D rendering, which supports OpenGL ES 2.0. Video removal is done through separate S-Video and HDMI connections. There is a slot for SD/MMC cards, supports SDIO, USB port, The Go-RS-232 serial connection, JTAG connection and two stereo 3.5 mm jacks for audio input/output.
The built-in storage and memory are provided through chip PoP, which includes 256 MB NAND Flash memory and 256 MB RAM (128 MB on earlier models). The Board uses up to 2 W power supply and can be powered from USB connector, or a separate power supply of 5 V due to the low energy consumption does not require additional coolers or radiators.
